How to Install Bamboo Fence Panels to a Chain-link or Wire Fence

  • Place the bamboo panel in position.
  • Place a cable tie through the gap behind the bamboo slat as seen in the picture below and tie around a bar or rail on the pool fence or around the closest wire/wires on a chain link/wire fence.
  • Repeat the process until you have installed cable ties to the highest and lowest possible points of the pool fence and there are sufficient cable ties to secure the bamboo panels so there is no movement.
  • Cut off excess length of cable ties.

Cutting the Bamboo

If you need to cut the bamboo use a Metal Cutting Disc on an angle grinder, the same as you would use to cut steel. A circular saw tends to shred the bamboo. You can also use a hand saw.